top of page

Join the cold spray community

CSAT 2023 Poster Session

Click the set of links below to open a new window featuring a PDF file of each abstract.

2023 Poster Submissions

1. Anil Lama, ColRAD - FIU - Influence of Carrier Gas on Microstructure and Mechanical Properties of Cold Sprayed Aluminum- Scandium Alloy

 

2. Anuraag Gangineri, University of Massachusetts Amherst (UMass Amherst) - Ultrahigh-Strain-Rate Dynamic Effects of Molecular-Weight Distribution of Polystyrene upon Plasticity and Fracture Properties in Cold Spray Deposition

3. Ara Kim, University of Massachusetts Amherst (UMass Amherst) - Ultrahigh-Strain-Rate Tribological Nonlinearity and Adhesion Behavior ofCopolymer Powders for Cold Spray

4. Astrid Rodriguez Negron, ColRAD - FIU - Advancements in Profilometry-based Indentation Plastometry for Detecting Spatial Variations of Cold-Sprayed Metals

5. Brian Feng, University of Southern California - Hybrid Bond Layers for Cold Spray Nb Metallization of CFRP Surfaces

6. Chaitanya Vundru, Northeastern University - An Experimental and Modeling Study of Residual Stresses in Cold Spray Deposition Process

7. Chiemeligo Onyemelukwe, University of Massachusetts Amherst (UMass Amherst) -  New Design for CO2 Cold Spray Cooling System

8. Denny John, ColRAD - FIU - Tailoring Microstructure and Compressive Strength of Aluminum High Entropy Alloy Powder for Cold Spray Deposition

 

9. *Evan Coronado, Northeastern University - Graded Metal Matrix Composite for Ballistics Applications Manufactured using Cold Spray Technology

 

10. Jay Yoder, Montana Technical University - Flow Characterization of Low-Pressure Cold Spray Systems

11. Kiran Judd, Worcester Polytechnic Institute (WPI) - Recycled Battlefield Titanium Scrap for Cold Spray Applications

 

12. Kishore Kumar, Northeastern University - Quantitative Nondestructive Evaluation of Cold Spray Manufactured Aluminum Samples in Additive Manufacturing and Repair Applications 

13. *Mahsa Amiri, University of California Irvine (UCI) - The Role of Powder Characteristics on the Strength and Ductility of Cold Sprayed Refractory Metal Deposits

14. Nicholas Mennie, Rowan University - Cold Spray Analysis of Polymer-Coated Metal Particles on Polymeric and Composite 

 

15. Okikiola Agbabiaka, Rowan University - Towards the Development of Mathematical Model for Predicting Cold Spray Process Outputs for Polymeric Materials Using Regression Analysis

 

16. Prateek, University of Massachusetts Amherst (UMass Amherst) - Cold Sprayable Metal-Matrix Composites for Mechanical and Electrical Applications

 

17. Roy Kesterson, South Dakota School of Mines & Technology - Microstructure, Corrosion Response, and Mechanical Behavior of Sacrificial Al-Zn-In Cold Spray Coatings on Aluminum and Steel Substrates

18. Sohayb Batwa, Northeastern University - Developing an Enhanced of Nickel-Chrome/Chrome-Carbide Coating for Railroad Steel by Cold Spray Technology 

19. Tristan Bacha, Rowan University - Polymer cold spray is not limited to low spray velocities

20. Zachary Velasquez, Northeastern University - Design, Iteration, and Simulation of Wide High Throughput Cold Spray Nozzles for Rapidly Manufacturing Coatings

21. *Dr. Alain Reiser, Massachusetts Institute of Technology (MIT) - Quantitative studies of microparticle impacts: unique insights into microstructure evolution, erosion and bonding at the single-particle level

bottom of page